Climatiq
source

OEKOBAUDAT

44189 Factors44189 Factor
44 Regions44 Region
5044 Activities5044 Activity

About OEKOBAUDAT

The German Federal Ministry for Housing, Urban Development, and Building provides the OEKOBAUDAT, an extensive database of emission factors for materials and equipment used in construction and building design.

Visit OEKOBAUDAT website
DATASET

OEKOBAUDAT 2024-II

PropertyValue
Description
The German Federal Ministry for Housing, Urban Development, and Building provides the OEKOBAUDAT, an extensive database of emission factors for materials and equipment used in construction and building design.
Source type
Governmental
Original dataset URLURL
Year released
2026
Geography
Multiple regions
Sector
Type of data
Activity-based
Emission results
CO2e
Data Transformation
The source reports emissions in terms of CO2e per unit of product, where the unit varies (e.g., kg, m3 etc). To ensure consistency within our database, this data has been normalized to CO2e per standard unit (e.g., per 1 kg, per 1 m3 etc). This normalization is achieved by dividing the reported CO2e values by their respective reference sizes, regardless of the unit of measurement.

License

PropertyValue
Type of license
Publicly available
License URLURL

Data quality

PropertyValue
Data quality assurance

Vetted by Climatiq. For further information on data quality assurance, see: https://www.climatiq.io/methodology#Data-Quality

Quality flag(s)
Methodology
231 factors, including corrected per-tonne units and totals that don’t match their parts.
Error
28 factors with unexplained negative values.

Methodology

PropertyValue
Standard
EN 15804:2012+A2:2019
IPCC AR method
  • AR5
  • AR6
LCA boundary
  • deconstruction
  • disposal
  • installation
  • maintenance
  • manufacturing
  • operational_energy_use
  • operational_water_use
  • production
  • raw_material_supply
  • recycling
  • refurbishment
  • repair
  • replacement
  • transport_to_manufacturing
  • transport_to_site
  • transport_to_waste_processing
  • use_phase
  • use_phase_carbon_removal
  • waste_processing
Scope applicability
  • 1
  • 2
  • 3.1
  • 3.2
  • 3.4
  • 3.5
  • 3.12
  • Outside of scopes
Emissions breakdown
  • Biogenic (CO2e)
  • Biogenic carbon content
  • Biogenic CO2 releases
  • Biogenic CO2 removals
  • Fossil (CO2e)
  • Land use change (CO2e)
  • Total (CO2e, AR5)
  • Total (CO2e, AR6)
  • Total (neutral approach)
Methodology description

OEKOBAUDAT follows EN 15804:2012+A2:2019 "Sustainability of construction works. Environmental product declarations. Core rules for the product category of construction products". A small number of datasets are still declared under EN 15804+A1; for these, only the total emission factor is available.

Climatiq publishes one emission factor per dataset and life cycle module (for example A1-A3 production, A4 transport to site, B1 use, C3 waste processing, C4 disposal and D recycling potential), including modules the source declares as zero. Datasets that follow the EF 3.1 reference package use IPCC AR6 GWPs; all others use IPCC AR5 GWPs.

There are three components to each total emission factor:

Total = fossil + biogenic + land use and land-use change

The source fields are GWPtotal, GWPfossil, GWPbiogenic and GWPluluc. Where the components do not add up to the total within 2%, the source total is published without the breakdown, with a methodology data quality flag.

EN 15804 is one of the few standards that requires biogenic carbon dioxide emissions and removals to be included; it follows a "-1/+1" approach whereby removals (into biomass) are multiplied by -1 and subsequent emissions (e.g. through combustion) are multiplied by 1. This is in contrast to the "neutral" approach which multiplies both by 0.

This is particularly relevant to timber and products derived from biomass used in construction; the total emission factor includes the carbon dioxide captured as carbon in the product. The total emission factor is therefore lower than under the neutral approach, and may be negative where biogenic removals exceed fossil and land use change emissions.

To support corporate reporting, each factor also gives the total under the neutral approach (fossil + land use change), alongside the fossil, land use change and biogenic values. Where the source reports the biogenic carbon content of the product or its packaging, this is published too, together with the biogenic CO2 removed during production and released at end of life (or, for packaging, at installation).

Negative emission factors carry a note in their description explaining the reason: a recycling credit (module D), carbonation during use, biogenic uptake during production, or recarbonation at end of life.

Limitation / key issues to note

OEKOBAUDAT follows the EN 15804:2012+A2:2019 standard, which uses a -1/+1 approach to biogenic carbon dioxide: the total emission factor includes carbon stored in the product and can be negative. For corporate reporting, use the total under the neutral approach (fossil + land use change), reported separately on each factor.

Biogenic CO2 product removals and emissions have been calculated using biogenic carbon content of the product (with packaging) where this has been provided by the source. Combining these with the CO2e neutral totals will produce -1/+1 totals that are aligned with the PACT -1/+1 approach. Note that the biogenic carbon may be missing for some products where the source does not provide it. Missing biogenic carbon data does not mean there is no biogenic carbon content.

Explore the OEKOBAUDAT dataset

Featured Emission Factors in OEKOBAUDAT

Explore All

Other Sources

Explore All
  • Go to CT

    CT

    Climate Transparency is a global partnership organisation funded by the German Government, World Bank, and several other bodies. It seeks to stimulate climate action in G20 countries through enhanced transparency. The Climate Transparency Report annually provides the emission intensity of electricity generation for various countries, based on the emissions from the respective grid mix.

  • Go to Carbon Minds

    Carbon Minds

    Carbon Minds is a sustainability data and consulting organisation providing one of the largest life cycle assessment and product carbon footprint databases for chemicals and plastics.

  • Go to CONCITO and 2-0 LCA

    CONCITO and 2-0 LCA

    CONCITO is Denmark’s leading climate and environmental research organisation that developed the Big Climate Database v1.2 in collaboration with 2.-0 LCA consultants. The database provides greenhouse gas emission factors for over 500 food products across multiple European markets based on life cycle assessments from production to retail to support sustainable consumption choices.

Interested in licensing this data?