Australian Government (DISER, DCCEEW)
About Australian Government (DISER, DCCEEW)
The Australian Government issues emission conversion factors for use by Australian and international organisations to report on greenhouse gas emissions. The key responsible departments / agencies are / were: DISER and DCCEEW.
Visit Australian Government (DISER, DCCEEW) websiteDatasets from Australian Government (DISER, DCCEEW)
National Greenhouse and Energy Reporting (Measurement) Determination (NGER)
| Property | Value |
|---|---|
| Description | The Australian Government issues emission conversion factors for use by Australian and international organisations to report on greenhouse gas emissions. The key responsible departments / agencies are / were: DISER and DCCEEW. |
| Source type | Governmental |
| Original dataset URL | URL |
| Year released | 2022-2026 |
| Geography | Australia |
| Sector | |
| Type of data | Activity-based |
| Emission results | CO2e - CO2 - CH4 - N2O |
| Data Transformation | NA |
License
| Property | Value |
|---|---|
| Type of license | Creative Commons Attribution 4.0 International (CC BY 4.0) |
| License URL | URL |
Data quality
| Property | Value |
|---|---|
| Data quality assurance | Vetted by Climatiq. For further information on data quality assurance, see: https://www.climatiq.io/methodology#Data-Quality |
| Quality flag(s) | NA |
Methodology
| Property | Value |
|---|---|
| IPCC AR method |
|
| LCA boundary |
|
| Scope applicability |
|
| Emissions breakdown |
|
| Methodology description | This dataset is derived from the National Greenhouse and Energy Reporting (Measurement) Determination 2008 (NGER Measurement Determination), published by the Australian Department of Climate Change, Energy, the Environment and Water (DCCEEW). The NGER Measurement Determination establishes the legally binding methodology for quantifying greenhouse gas emissions under Australia’s National Greenhouse and Energy Reporting (NGER) framework, providing source-specific equations, emission factors, energy content factors, and activity definitions across sectors including fuel combustion, fugitive emissions, electricity, industrial processes, and waste. The methodology aligns with Australia’s National Greenhouse Accounts and broader international greenhouse gas accounting principles, while maintaining consistency with facility-level regulatory reporting requirements. This dataset includes fuel combustion emission factors, electricity grid and residual mix factors, fugitive emissions, industrial process emissions, wastewater, and waste treatment factors. Fuel combustion factors were primarily retrieved from Schedule 1 – Energy content factors and emission factors (Parts 1–4) and include solid, gaseous, and liquid fuels for both stationary and transport energy purposes. Where emission factors were provided in energy-based units (e.g., kg CO2-e/GJ), additional mass- or volume-based factors were derived by converting using the energy content factors specified by the source. Electricity emission factors, including location-based grid mix and residual mix factors by Australian state, were retrieved from Schedule 1, Part 6 – Indirect (scope 2) emission factors and residual mix factors for consumption of electricity. Fugitive emissions factors for natural gas systems, crude oil production and refining, venting, flaring, and gas infrastructure were retrieved from Chapter 3. These emission fcators were calculated by the source using specific methods as described in the legislation. Additional industrial process were retrieved from Chapter 4 including methodologies for cement, lime production and nitric acid production. Wastewater and waste treatment factors were retrieved from Chapter 5, including data for biological treatment of waste, and methane and nitrous oxide emissions from wastewater handling. The NGER framework applies a hierarchical methodology structure (Methods 1–4), ranging from default factors to facility-specific sampling, analysis, and direct measurement. The factors included in this dataset predominantly reflect default Method 1 and Method 2 values, intended for standardized reporting where direct facility measurements are unavailable or not required. The dataset reflects the methodology and legislative definitions applicable to the 2025/26 reporting year, including periodic updates and corrections to maintain consistency with national inventory reporting and evolving greenhouse gas accounting practices. |
Explore the DISER dataset
Featured Emission Factors in Australian Government (DISER, DCCEEW)
Explore All- Go to Electricity supplied from grid
Electricity supplied from grid
Energy Energy - Go to Natural gas
Natural gas
Energy Energy - Go to Electricity supplied from grid: T&D losses
Electricity supplied from grid: T&D losses
Energy Energy - Go to Electricity supplied from grid - residual mix
Electricity supplied from grid - residual mix
Energy Energy - Go to Gasoline - for use as fuel in an aircraft - transport
Gasoline - for use as fuel in an aircraft - transport
Energy Energy - Go to Aviation gasoline
Aviation gasoline
Energy Energy
Other Sources
Explore All- Go to Government of Canada
Government of Canada
Environment and Climate Change Canada (ECCC) is the department of the Government of Canada responsible for coordinating environmental policies and programs as well as enforcing environmental regulations. Canada's Official Greenhouse Gas Inventory offers comprehensive data and insights on Canada's environmental footprint through greenhouse gas emission records.
- Go to IEA CBAM
IEA CBAM
The European Union's Carbon Border Adjustment Mechanism (CBAM) is a regulatory tool designed to measure carbon emissions attributed to the production of high-carbon goods imported into the EU, aiming to promote cleaner practices in industrial production across non-EU countries. To this end, the European Commission publishes emission factors providing the necessary metrics for compliance and environmental integrity. Annex II of Commission Implementing Regulation (EU) 2025/2621 provides default electricity emission factors, derived from International Energy Agency (IEA) data, representing the country-of-origin electricity grid emission intensity used to estimate indirect embedded emissions from electricity consumed in the production of CBAM goods.
- Go to PCAF
PCAF
The PCAF European Building Emission Factor Database provides financial institutions with emission factors for mortgages and real estate across Europe, enabling measurement and tracking of financed emissions by country, building type, and energy performance.