Climatiq
source

Australian Government (DISER, DCCEEW)

1277 Factors1277 Factor
10 Regions10 Region
157 Activities157 Activity

About Australian Government (DISER, DCCEEW)

The Australian Government issues emission conversion factors for use by Australian and international organisations to report on greenhouse gas emissions. The key responsible departments / agencies are / were: DISER and DCCEEW.

Visit Australian Government (DISER, DCCEEW) website

Datasets from Australian Government (DISER, DCCEEW)

DATASET

National Greenhouse Account Factors

PropertyValue
Description
The Australian Government issues emission conversion factors for use by Australian and international organisations to report on greenhouse gas emissions. The key responsible departments / agencies are / were: DISER and DCCEEW.
Source type
Governmental
Original dataset URLURL
Year released
2022-2026
Geography
Australia
Sector
Type of data
Activity-based
Emission results
CO2e - CO2 - CH4 - N2O
Data Transformation
The source reports CH4 and N2O for fuel combustion in kg CO2e/GJ; Climatiq converts these to mass of gas using the AR5 GWPs (CH4 = 28, N2O = 265) and provides factors per GJ and per physical unit using the source's energy contents. Volumes in kL are converted to litres.

License

PropertyValue
Type of license
Creative Commons Attribution 4.0 International (CC BY 4.0)
License URLURL

Data quality

PropertyValue
Data quality assurance

Vetted by Climatiq. For further information on data quality assurance, see: https://www.climatiq.io/methodology#Data-Quality

Quality flag(s)
Partial factor
some industrial process factors (Table 12) include CO2 emissions only.

Methodology

PropertyValue
IPCC AR method
  • AR5
LCA boundary
  • electricity_generation
  • end_of_life
  • fuel_combustion
  • fugitive_release
  • fugitive_release_non_kyoto
  • manufacturing
  • transmission_and_distribution
  • well_to_tank
  • well_to_tank-transmission_and_distribution
Scope applicability
  • 1
  • 2
  • 3.1
  • 3.3
  • 3.5
  • 3.10
  • 3.11
  • 3.12
  • Outside of scopes
Emissions breakdown
  • CH4
  • CO2
  • N2O
  • Other gases (CO2e, AR5)
  • Total (CO2e, AR5)
Methodology description

The National Greenhouse Accounts (NGA) Factors, published annually by the Australian Department of Climate Change, Energy, the Environment and Water (DCCEEW), provide standardised greenhouse gas emission factors for greenhouse gas accounting across electricity, fuels, industrial processes, waste, wastewater and refrigerants. The methodology aligns with the National Greenhouse and Energy Reporting (NGER) (Measurement) Determination 2008, Australia's National Greenhouse Accounts, and guidance from the IPCC and the GHG Protocol. Emission factors are based on national average data and standardised assumptions.

Each year's emission factors are retrieved from that year's NGA Factors publication and accompanying Excel workbook. For the 2026 edition:

  • Electricity: location-based grid factors for the national grid and the North Western Interconnected System (Table 1), the national residual mix (Table 2), and transmission and distribution (T&D) losses by state and grid (Table 40). Upstream (well-to-tank) electricity factors by state and grid are calculated as the Table 1 scope 3 factor minus the Table 40 T&D loss factor.
  • Fuel combustion (scope 1): emission factors for solid, gaseous and liquid fuels, including transport fuels, retrieved from the workbook sheet "Energy - Scope 1" (Tables 4, 5, 8 and 9), per GJ and per physical unit. These are new in the 2026 edition.
  • Fuel well-to-tank (scope 3): upstream emissions from the extraction, processing and transport of fuels, retrieved from the workbook sheet "Energy - Scope 3" (Tables 4 and 6 to 9), per GJ and per physical unit. Natural gas is provided for both metro and non-metro areas.
  • Refrigerants: global warming potentials from Table 11, distinguishing gases covered by the Kyoto Protocol from non-Kyoto gases reported outside of scopes.
  • Industrial processes and product use: Tables 12 to 14.
  • Waste and wastewater: Tables 15 to 19, covering landfill disposal, waste incineration, biological treatment and wastewater treatment.

The dataset reflects official Australian greenhouse gas accounting methodologies and is updated annually to incorporate methodological refinements, policy updates and international reporting obligations under the UNFCCC and the Paris Agreement.

Limitation / key issues to note

Electricity upstream (well-to-tank) emission factors are calculated by Climatiq as the difference between the total scope 3 electricity factor and the T&D loss factor, rather than published by the source as standalone values. Both inputs are reported to two decimal places, so small values are imprecise; for Victoria in 2026 the result is 0.00 kg CO2e/kWh, meaning the true value is below 0.01.

Certain emission factors represent partial greenhouse gas coverage. Biofuel combustion factors include CH4 and N2O only, as the source does not provide biogenic CO2 emissions. Some wastewater treatment factors account for methane (CH4) only, as the source considers nitrous oxide (N2O) negligible, and some industrial process factors include CO2 only.

Explore the DISER dataset

Featured Emission Factors in Australian Government (DISER, DCCEEW)

Explore All

Other Sources

Explore All
  • Go to Agribalyse

    Agribalyse

    Agribalyse is a comprehensive database developed by ADEME (Agence de la transition écologique), offering detailed environmental impact assessments of food products. This resource provides extensive data on the life cycle of food items, including production, processing, and distribution stages, to support informed choices towards sustainable consumption.

  • Go to EEI

    EEI

    The Edison Electric Institute (EEI) is the association that represents all U.S. investor-owned electric companies. EEI has developed a database to support corporate sustainability reporting, especially in calculating scope 2 emissions for specific US electricity suppliers.

  • Go to Precoplat

    Precoplat

    Precoplat Präzisions-Leiterplatten-Technik GmbH is a German printed circuit board (PCB) manufacturer that publishes a Product Carbon Footprint (PCF) factsheet for an average multilayer ENIG PCB. The underlying data come from the study "Carbon footprint analysis of printed circuit board" (Yung et al.) in Environmental Carbon Footprints: Industrial Case Studies (Elsevier, 2018).

Interested in licensing this data?