Climatiq
source

UBA Austria

408 Factors408 Factor
1 Region1 Region
69 Activities69 Activity

About UBA Austria

The Environment Agency Austria (Umweltbundesamt) publishes official greenhouse‑gas inventories and sector-specific emission factors, based on national reports submitted under the UNFCCC and EU regulations, to support transparent, policy‑aligned GHG accounting across Austria.

Visit UBA Austria website

Datasets from UBA Austria

DATASET

Harmonisierte Oesterreichische THG-Emissionsfaktoren relevanter Energietraeger

PropertyValue
Description
The Environment Agency Austria (Umweltbundesamt) publishes official greenhouse‑gas inventories and sector-specific emission factors, based on national reports submitted under the UNFCCC and EU regulations, to support transparent, policy‑aligned GHG accounting across Austria.
Source type
Governmental
Original dataset URLURL
Year released
2023
Geography
Austria
Sector
Type of data
Activity-based
Emission results
CO2e
Data Transformation
The source reports emissions in gCO2e/kWh, which have been converted to kgCO2e/kWh to ensure consistency.

License

PropertyValue
Type of license
Creative Commons Attribution 4.0 License
License URLURL

Data quality

PropertyValue
Data quality assurance

Vetted by Climatiq. For further information on data quality assurance, see: https://www.climatiq.io/methodology#Data-Quality

Quality flag(s)
NA

Methodology

PropertyValue
IPCC AR method
  • AR5
LCA boundary
  • electricity_generation
  • fuel_combustion
  • total
  • transmission_and_distribution
  • upstream
  • upstream-transmission_and_distribution
  • upstream-use_phase-transmission_and_distribution
  • use_phase
  • use_phase
  • use_phase-transmission_and_distribution
  • well_to_tank
  • well_to_wheel
Scope applicability
  • 1
  • 2
  • 3.3
  • 3.10
  • 3.11
Emissions breakdown
  • Total (CO2e, AR5)
Methodology description

The dataset provides harmonised Austrian GHG emission factors for energy carriers across three end-use sectors: electricity, space heating and mobility.

Electricity

Emission factors are provided for the Austrian production mix (Stromaufbringung) and for electricity generated from individual energy sources: hydropower, wind, photovoltaic, biomass, natural gas, waste and other fossil fuels. The production mix includes both domestic generation and electricity imports, with imports valued using the generation emission factors of the exporting countries (mainly Germany and Czechia, plus Switzerland, Slovenia and Hungary).

Each activity is split into the following lifecycle stages:

  • Direct emissions from generation (electricity_generation)
  • Upstream emissions from the extraction, processing and supply of fuels and from plant infrastructure (upstream, or well_to_tank for the production mix)
  • Total emissions (total), the sum of direct and upstream emissions

Fuel input data come from the Statistics Austria energy balances for 2023, and import shares come from E-Control statistics. Emissions from combined heat and power (CHP) plants are allocated between electricity and heat using the Finnish method, based on reference efficiencies of 57% electrical and 90% thermal.

The source assumes a conservative grid loss rate of 6%. Climatiq calculated a separate transmission and distribution losses emission factor (transmission_and_distribution) as 6% of the total production mix emission factor.

District heating

The source reports district heating emission factors per kWh of final energy consumption. These factors include 14% thermal losses in the district heating network, which is the Austrian average in national energy statistics. Climatiq publishes the source factors as follows:

  • Total emission factor (upstream-use_phase-transmission_and_distribution): direct and upstream emissions, including network losses
  • Direct emission factor (use_phase-transmission_and_distribution): direct emissions, including network losses
  • Upstream emission factor (upstream-transmission_and_distribution): upstream emissions, including network losses

Climatiq has also split the direct emission factor into two derived factors, so that use-phase emissions and network-loss emissions can be reported separately:

  • Use phase (use_phase): 86% of the direct emission factor, with the share from network losses removed
  • Transmission and distribution losses (transmission_and_distribution): 14% of the direct emission factor, allocated to network losses

Mobility

Emission factors are provided for transport fuels, including diesel, petrol, natural gas, biodiesel and bioethanol. They cover direct emissions from fuel combustion (fuel_combustion), upstream emissions from fuel extraction, processing, refining and distribution (well_to_tank), and total well-to-wheel emissions (well_to_wheel), combining both stages. Vehicle manufacturing, maintenance and end-of-life emissions are excluded.

For full details see: https://www.umweltbundesamt.at/fileadmin/site/publikationen/rep0888.pdf

Explore the UBA Austria dataset

Featured Emission Factors in UBA Austria

Explore All

Other Sources

Explore All
  • Go to Australian Government (DISER, DCCEEW)

    Australian Government (DISER, DCCEEW)

    The Australian Government issues emission conversion factors for use by Australian and international organisations to report on greenhouse gas emissions. The key responsible departments / agencies are / were: DISER and DCCEEW.

  • Go to PCAF

    PCAF

    The PCAF European Building Emission Factor Database provides financial institutions with emission factors for mortgages and real estate across Europe, enabling measurement and tracking of financed emissions by country, building type, and energy performance.

  • Go to Statistics Finland

    Statistics Finland

    Statistics Finland is the national statistical office of Finland, providing official statistics and nationally recognized fuel and electricity emission factors to support decision-making, research and environmental reporting.

Interested in licensing this data?