Europe (Ecoinvent)

Rest-of-World (Ecoinvent)

Clay brick (clay brick production)

United Arab Emirates (the)

Afghanistan

Antigua and Barbuda

Albania

Angola

Argentina

Austria

Australia

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bolivia, Plurinational State of

Brazil

Bahamas

Bhutan

Belize

Canada

Central African Republic

Congo

Switzerland

Côte d'Ivoire

Chile

Cameroon

China

Colombia

Costa Rica

Cyprus

Czechia

Germany

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Spain

Ethiopia

Finland

Fiji

France

Gabon

United Kingdom

Grenada

Gambia

Guinea

Equatorial Guinea

Greece

Guatemala

Guinea-Bissau

Hong Kong

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

India

Iraq

Iran, Islamic Republic of

Iceland

Italy

Jamaica

Jordan

Japan

Kenya

Cambodia

Kiribati

Saint Kitts and Nevis

Korea, Republic of

Kuwait

Kazakhstan

Lao People's Democratic Republic

Lebanon

Saint Lucia

Sri Lanka

Lesotho

Lithuania

Luxembourg

Latvia

Morocco

Moldova, Republic of

North Macedonia

Mali

Myanmar

Mongolia

Malta

Mauritius

Maldives

Malawi

Mexico

Malaysia

Namibia

Niger

Cut stone and stone product manufacturing

Ground or treated mineral and earth manufacturing

Copper / nickel / lead and zinc mining

Emissions generated by the activity within the product supply chain as described in ecoinvent v3.8. The product "clay brick" represents bricks with clay as the main primary material. Ordinary bricks constitute the largest fraction of total brick production. They have a porous body. If there are no special requirements with regard to appearance or resistance to weathering, they are called inner-wall bricks, or backing bricks, and can be solid or hollow. For hollow bricks there are requirements for compression strength (4 - 28 MPa) and brick bulk density of 1.0 -2.2 kg/dm3. (The brick bulk density is calculated by dividing the mass of the dried brick by its volume including all channels, finger holes, and mortar pockets, or frogs.) One special variety of brick is the insulating brick used to reduce heat flow. For these the strength specification is between 2 and 28 MPa. The brick density must be only between 0.6 and 1.0 kg/dm3. Adding materials that burn during firing increases the porosity. Insulating brick can be as large as 49 × 30 × 23.8 cm. Progress is being made in producing room high building components. These are known as brick planks and are produced as monolithic pieces with an extrusion press. If the brick has surface and colour suitable for facing and it is able to withstand frost, the brick is classified as face brick, or facing brick. If the average compression strength is 3 45 MPa, the brick is ranked as extra strong. The main product of the Swiss industry is brick. It is usually plastered. If it is used for a visible brick wall aesthetic criteria as colour and structure of the surface have to be fulfilled and a good weathering resistance is necessary. The cut-off classification is allocatable product. The activity type is ordinary transforming activity. The reference product amount is 1.

The activity generating the emissions is clay brick production, moulded. The Reference Product is clay brick. The product "clay brick" represents bricks with clay as the main primary material. Ordinary bricks constitute the largest fraction of total brick production. They have a porous body. If there are no special requirements with regard to appearance or resistance to weathering, they are called inner-wall bricks, or backing bricks, and can be solid or hollow. For hollow bricks there are requirements for compression strength (4 - 28 MPa) and brick bulk density of 1.0 -2.2 kg/dm3. (The brick bulk density is calculated by dividing the mass of the dried brick by its volume including all channels, finger holes, and mortar pockets, or frogs.) One special variety of brick is the insulating brick used to reduce heat flow. For these the strength specification is between 2 and 28 MPa. The brick density must be only between 0.6 and 1.0 kg/dm3. Adding materials that burn during firing increases the porosity. Insulating brick can be as large as 49 × 30 × 23.8 cm. Progress is being made in producing room high building components. These are known as brick planks and are produced as monolithic pieces with an extrusion press. If the brick has surface and colour suitable for facing and it is able to withstand frost, the brick is classified as face brick, or facing brick. If the average compression strength is 3 45 MPa, the brick is ranked as extra strong. The main product of the Swiss industry is brick. It is usually plastered. If it is used for a visible brick wall aesthetic criteria as colour and structure of the surface have to be fulfilled and a good weathering resistance is necessary. The Reference Product amount is 1. The cut-off classification is allocatable product. The activity type is ordinary transforming activity. Please refer to the ecoinvent documentation for full details: https://ecoquery.ecoinvent.org/3.12/cutoff/dataset/29349/documentation

Clay brick (production - moulded)

The activity generating the emissions is clay brick production, extruded. The Reference Product is clay brick. The product "clay brick" represents bricks with clay as the main primary material. Ordinary bricks constitute the largest fraction of total brick production. They have a porous body. If there are no special requirements with regard to appearance or resistance to weathering, they are called inner-wall bricks, or backing bricks, and can be solid or hollow. For hollow bricks there are requirements for compression strength (4 - 28 MPa) and brick bulk density of 1.0 -2.2 kg/dm3. (The brick bulk density is calculated by dividing the mass of the dried brick by its volume including all channels, finger holes, and mortar pockets, or frogs.) One special variety of brick is the insulating brick used to reduce heat flow. For these the strength specification is between 2 and 28 MPa. The brick density must be only between 0.6 and 1.0 kg/dm3. Adding materials that burn during firing increases the porosity. Insulating brick can be as large as 49 × 30 × 23.8 cm. Progress is being made in producing room high building components. These are known as brick planks and are produced as monolithic pieces with an extrusion press. If the brick has surface and colour suitable for facing and it is able to withstand frost, the brick is classified as face brick, or facing brick. If the average compression strength is 3 45 MPa, the brick is ranked as extra strong. The main product of the Swiss industry is brick. It is usually plastered. If it is used for a visible brick wall aesthetic criteria as colour and structure of the surface have to be fulfilled and a good weathering resistance is necessary. The Reference Product amount is 1. The cut-off classification is allocatable product. The activity type is ordinary transforming activity. Please refer to the ecoinvent documentation for full details: https://ecoquery.ecoinvent.org/3.12/cutoff/dataset/30443/documentation

Clay brick (production - extruded)

The activity generating the emissions is clay brick production, extruded. The Reference Product is clay brick. The product "clay brick" represents bricks with clay as the main primary material. Ordinary bricks constitute the largest fraction of total brick production. They have a porous body. If there are no special requirements with regard to appearance or resistance to weathering, they are called inner-wall bricks, or backing bricks, and can be solid or hollow. For hollow bricks there are requirements for compression strength (4 - 28 MPa) and brick bulk density of 1.0 -2.2 kg/dm3. (The brick bulk density is calculated by dividing the mass of the dried brick by its volume including all channels, finger holes, and mortar pockets, or frogs.) One special variety of brick is the insulating brick used to reduce heat flow. For these the strength specification is between 2 and 28 MPa. The brick density must be only between 0.6 and 1.0 kg/dm3. Adding materials that burn during firing increases the porosity. Insulating brick can be as large as 49 × 30 × 23.8 cm. Progress is being made in producing room high building components. These are known as brick planks and are produced as monolithic pieces with an extrusion press. If the brick has surface and colour suitable for facing and it is able to withstand frost, the brick is classified as face brick, or facing brick. If the average compression strength is 3 45 MPa, the brick is ranked as extra strong. The main product of the Swiss industry is brick. It is usually plastered. If it is used for a visible brick wall aesthetic criteria as colour and structure of the surface have to be fulfilled and a good weathering resistance is necessary. The Reference Product amount is 1. The cut-off classification is allocatable product. The activity type is ordinary transforming activity. Please refer to the ecoinvent documentation for full details: https://ecoquery.ecoinvent.org/3.12/cutoff/dataset/30208/documentation

The activity generating the emissions is clay brick production, extruded. The Reference Product is clay brick. The product "clay brick" represents bricks with clay as the main primary material. Ordinary bricks constitute the largest fraction of total brick production. They have a porous body. If there are no special requirements with regard to appearance or resistance to weathering, they are called inner-wall bricks, or backing bricks, and can be solid or hollow. For hollow bricks there are requirements for compression strength (4 - 28 MPa) and brick bulk density of 1.0 -2.2 kg/dm3. (The brick bulk density is calculated by dividing the mass of the dried brick by its volume including all channels, finger holes, and mortar pockets, or frogs.) One special variety of brick is the insulating brick used to reduce heat flow. For these the strength specification is between 2 and 28 MPa. The brick density must be only between 0.6 and 1.0 kg/dm3. Adding materials that burn during firing increases the porosity. Insulating brick can be as large as 49 × 30 × 23.8 cm. Progress is being made in producing room high building components. These are known as brick planks and are produced as monolithic pieces with an extrusion press. If the brick has surface and colour suitable for facing and it is able to withstand frost, the brick is classified as face brick, or facing brick. If the average compression strength is 3 45 MPa, the brick is ranked as extra strong. The main product of the Swiss industry is brick. It is usually plastered. If it is used for a visible brick wall aesthetic criteria as colour and structure of the surface have to be fulfilled and a good weathering resistance is necessary. The Reference Product amount is 1. The cut-off classification is allocatable product. The activity type is ordinary transforming activity. Please refer to the ecoinvent documentation for full details: https://ecoquery.ecoinvent.org/3.12/cutoff/dataset/30175/documentation

Property	Value
Name	Clay brick (clay brick production)
Sector	Materials and Manufacturing
Category	Mined Materials
Source	ecoinvent
Region	Europe (Ecoinvent) (ECOINVENT_EUROPE), Rest-of-World (Ecoinvent) (ECOINVENT_ROW)
Year	1992
LCA Activity	source_specific

Clay brick (clay brick production)

Activity summary

Detailed Metadata

API Reference

Interested in licensing this data?

Related factors

Mined Materials Emission Factors

Cut stone and stone product manufacturing

Ground or treated mineral and earth manufacturing

Copper / nickel / lead and zinc mining

Clay brick (clay brick production)

Activity summary

Detailed Metadata Unlock with Data Pro

API Reference Unlock with Data Pro

Interested in licensing this data?

Related factors

Mined Materials Emission Factors

Cut stone and stone product manufacturing

Ground or treated mineral and earth manufacturing

Copper / nickel / lead and zinc mining

Detailed Metadata

API Reference